A gimbal camera cable for the Autel EVO Max 4T that carries control signals, power and the video stream between the flight controller and the optical system.
Thin-film flexible conductors with reinforced insulation withstand the gimbal's constant stabilization movements on three axes — a stated life of over 100,000 dynamic load cycles. Multilayer electromagnetic shielding protects the video lines from motor and communication module interference, so the image stays sharp without banding or artifacts.
The geometry and connector layout match the stock body space, so replacement needs no modification of the mounting points and helps restore the camera after mechanical damage or wear. Weight is under 3 g. Replacement requires microelectronics skills and careful disassembly of the body; repairs are best done in a service environment.
Key Advantages
- Over 100,000 bend cycles
- Electromagnetic shielding of the video line
- High-density quick-release connectors
- Weight under 3 g
Technical Specifications
| Parameter | Value |
|---|---|
| Part type | Gimbal camera flex cable (FPC) |
| Compatibility | Autel EVO Max 4T |
| Purpose | Gimbal control, power and video signals |
| Material | High-purity copper alloy, polyimide film |
| Connection | High-density quick-release connectors |
| Bend resistance | over 100,000 cycles |
| Shielding | Electromagnetic shielding coating |
| Weight | under 3 g |
Applications
Repairing the Autel EVO Max 4T gimbal camera in case of video loss, artifacts or wear of the stock cable.