|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Repeater Antennas Avenger, Skyrazor, Alientech — Buy Signal Boosters for FPV Drones
Repeater antennas solve one specific combat problem: keeping a drone's control and video signal stable at distances where a stock controller antenna no longer gets through — due to range, terrain, or enemy electronic warfare. Avenger (AvengeAngel) builds its lineup around transmission power: tri-band remote antennas with a high gain coefficient, designed to work under active jamming. Skyrazor is a Ukrainian brand that offers not a standalone antenna but a paired system — "booster antenna + repeater": the Varta model boosts the signal right at the position, while a separate Echo repeater compensates for losses over long cable runs. Alientech and MAVKA (2E Tactical) favor a compact approach — smaller antenna footprint while keeping tri-band coverage, which suits mobile operators. The choice between models comes down to the scenario, not the brand name: if the main issue is cable length to the operator's position, a repeater is what's needed; if the issue is the range of the channel itself, a remote booster antenna with high gain is the answer.
An antenna or repeater rarely works as a standalone device — a full kit builds up around it. You'll need coaxial cables of the right length (typically 20 m, in RG-8 or SLL-400 configurations) with N-Type–QMA connectors, a tripod or mast to raise the antenna above terrain (from compact 1.4–2.6 m stands to field telescopic masts of 8–15 m), and, where needed, a two-axis rotary mount for precise aiming of a directional antenna. It's also worth checking connector type: some antennas (MAVKA, for instance) use SMA and require an adapter to N-Type for compatibility with the rest of the lineup's equipment. When assembling a system, account for both the weight load on the mast and the power source — some booster antennas run on batteries, while repeaters on long cable runs are built for autonomous field operation without a wired power supply.
Technical Advantages of Repeater Antennas in This Category
- Tri-band coverage — operation across 2.4/5.2/5.8 GHz, covering most control and video channels for DJI, Autel, and FPV systems regardless of antenna brand.
- Signal gain coefficient — in the Avenger lineup and comparable solutions, gain reaches 18–20 dB, directly affecting stable connection range under interference.
- Loss compensation on long cable runs — the Skyrazor Echo repeater is built specifically for setups where the cable from controller to antenna exceeds 20–40 meters and the signal would otherwise degrade.
- Moisture and dust protection — remote antennas in the Avenger Booster class carry an IPX68 protection rating, allowing operation in rain and field conditions without extra shelter.
- Standalone power supply — battery packs with capacity up to 8000 mAh (as in the MAVKA ROC4) let the booster antenna run without being tied to a fixed power source.
- Connector compatibility — N-Type, QMA, and SMA standards (with adapters) allow antennas and repeaters from different brands to be combined into one system without replacing the whole kit.
- Directionality and EW resistance — antenna design is built to hold the control channel specifically under active signal suppression, not just to extend nominal range in open terrain.
Repeater Antennas from Astreia Tactical
Astreia Tactical supplies booster antennas and repeaters from Avenger, Skyrazor, Alientech, and MAVKA that match the parameters stated by the manufacturer — frequency bands, gain coefficient, and protection class. Equipment is checked for completeness and correct match to the order before shipping. If you need to put together a system for a specific scenario — a long cable run to the position, operation under active electronic warfare, or a limited power source — the store's consultants can help match the antenna, repeater, and cable assembly so they work as one compatible system rather than a set of mismatched components.