The Walksnail Avatar GT2 digital FPV kit with a video transmitter up to 2 W, a 1/2″ camera and 32 GB of onboard memory.
The kit combines a video transmitter with a developed heat sink and a camera with a 1/2″ sensor, which gives 1080p video up to 100 fps with an average latency under 22 ms. Transmitter power is adjustable up to 2000 mW, and the housing's heatsink is designed for high-power operation without overheating.
The built-in 32 GB memory duplicates flight recording onboard, preserving footage even if the airwaves were noisy. Power is 6–25.2 V (2S–6S LiPo), so no extra regulators are needed. The antennas have LHCP circular polarization; the camera has a 160° field of view.
Key Advantages
- 1080p up to 100 fps, latency under 22 ms
- Transmitter power up to 2 W
- 1/2″ camera, 160° FOV
- 32 GB onboard memory
- Power 6–25.2 V (2S–6S)
Technical Specifications
| Parameter | Value |
|---|---|
| Model | Walksnail Avatar GT2 Kit |
| Video resolution | 1080p / 720p |
| Frame rate | 60 / 100 fps |
| Signal latency | average under 22 ms |
| Transmitter power | adjustable, up to 2000 mW |
| Camera sensor | 1/2″ |
| Field of view (FOV) | 160° |
| Onboard memory | 32 GB |
| Supply voltage | 6–25.2 V (2S–6S LiPo) |
| Antenna polarization | LHCP |
| Interfaces | Power connector, USB-C, UART |
| Operating temperature | −20 °C to +40 °C |
Applications
Digital video on Walksnail Avatar FPV drones at long range.