Stevia FlyT is a portable four-band video detector of analog FPV drones across an extended spectrum from 250 to 6185 MHz for early warning of an active video channel.
Compared with the tri-band version, the FlyT additionally covers the lower 250–950 MHz band. Right after power-on the detector scans all four bands in parallel — 250–950, 950–1800, 2350–4000 and 4900–6185 MHz — registers video transmitters and related telemetry, shows video and signal level and gives an audible alert. The activity monitoring mode also lets you check EW equipment operation. The stated range is up to 10 km depending on conditions and transmitter power.
The built-in 10,000 mAh battery provides 5–7 hours of operation and charges via USB Type-C. Three SMA antenna ports and an RCA video output are provided. The 185 × 90 × 40 mm PETG housing weighs 600 g, is rated IP40 and has passive cooling. The detector only detects signals and is not designed to suppress them.
Key Advantages
- Four bands from 250 to 6185 MHz
- Parallel scanning of all bands
- Video, telemetry and signal level
- Activity monitoring for EW checks
- 5–7 hours of battery life
Technical Specifications
| Parameter | Value |
|---|---|
| Device type | Portable video detector |
| Band 1 | 250–950 MHz |
| Band 2 | 950–1800 MHz |
| Band 3 | 2350–4000 MHz |
| Band 4 | 4900–6185 MHz |
| Mode | Parallel scanning of 4 bands |
| EW check | Activity monitoring |
| Detection range | up to 10 km (depends on conditions and transmitter power) |
| Indication | Video, telemetry, signal level, sound |
| Battery | Built-in 10,000 mAh |
| Operating time | 5–7 hours |
| Power | USB Type-C (5 V / up to 3 A) |
| Interfaces | RCA video output, 3 × SMA antenna ports |
| Dimensions / weight | 185 × 90 × 40 mm, 600 g |
| Housing / protection | PETG, IP40, passive cooling |
Applications
Early detection of FPV drones and RF monitoring across an extended spectrum at positions and on the move, and checking the operation of own EW equipment.