A flat gimbal camera flex cable for the Autel Evo Max 4N that connects the optical unit to the control board.
The cable is designed for the geometry and dynamic loads of the three-axis stabilizer and carries high-resolution video and control commands. The multilayer structure with a reinforced coating stays flexible as the camera angles constantly change during maneuvering and wind; the cable is rated for hundreds of thousands of bend cycles — important for the Max 4N, where the camera continuously tracks targets.
The polyimide base and precisely shaped bends prevent excess tension at the gimbal's extreme positions, and the shielding layer protects against motor and video transmitter interference, preventing banding and digital artifacts on the video and delivering thermal and optical imagery to the controller. The cable operates from –20 to +60 °C. Replacement requires microelectronics skills and careful disassembly of the body; repairs are best done in a service environment.
Key Advantages
- Polyimide base with shielding coating
- Hundreds of thousands of bend cycles
- Video, power and control transmission
- Operation from –20 to +60 °C
Technical Specifications
| Parameter | Value |
|---|---|
| Cable type | Flat flexible cable (FPC) |
| Compatibility | Autel Evo Max 4N |
| Purpose | Camera control, power and video signals |
| Material | Polyimide, sputtered copper conductors |
| Interference protection | Shielding coating |
| Operating temperature | –20…+60 °C |
Applications
Repairing the Autel Evo Max 4N gimbal in case of video loss, artifacts or wear of the stock cable.