A digital repeater for the Walksnail Avatar system: it receives the signal from the aircraft on 5.8 GHz and relays it to the goggles on 5.2 GHz.
The repeater separates the communication channels: video from the aircraft is received in the 5.50–5.85 GHz band and sent to the goggles or an external receiver in the 5.15–5.30 GHz band. This reduces the risk of mutual interference at the position and allows moving the emitter away from the operator by mounting the device on a mast or tripod. 1080p and 720p modes up to 100 frames per second are supported.
The antennas have a 7 dBi gain and left-hand circular polarization (LHCP). The repeater runs on 3S–6S LiPo (9–26 V) and weighs 145.9 g without antennas.
Key Advantages
- Receives on 5.8 GHz, relays to goggles on 5.2 GHz
- Modes up to 1080p/100 fps
- 7 dBi antennas, LHCP polarization
- Power 9–26 V (3S–6S LiPo)
- Mounts on a mast or tripod
Technical Specifications
| Parameter | Value |
|---|---|
| Model | Walksnail Avatar Repeater |
| Receiving from source | 5.50–5.85 GHz |
| Transmitting to receiver | 5.15–5.30 GHz |
| Relay resolution | 1080p/100fps, 1080p/60fps, 720p/100fps, 720p/60fps |
| Transmitter power (EIRP) | FCC: <30 dBm; CE: <14 dBm |
| Antenna gain | 7 dBi (average) |
| Antenna polarization | LHCP (left-hand circular) |
| Input voltage | 9–26 V (3S–6S LiPo) |
| Interfaces | USB Type-C, 4-Pin 1.0 mm |
| Dimensions | 119.5 × 72 × 18.6 mm |
| Weight | 145.9 g (without antennas) |
Applications
Extending the range and stability of Walksnail Avatar digital video links in difficult terrain.