VIDIK is a portable tri-band detector and receiver of analog FPV drone video with a 7″ screen for quickly finding out what is active on the air.
After start-up the detector automatically scans 850–2200, 2800–4150 and 4850–6100 MHz with a 2 MHz step, completing a full cycle in 15–20 seconds. When it finds an active video channel, it shows the frequency, RSSI signal level and the image itself on screen and sounds an alert. The Ignore function excludes known frequencies so that repeat scans on a crowded spectrum are more effective. The stated interception range is up to 10 km depending on conditions.
Start-up requires no complex setup. The built-in 10,000 mAh battery provides up to 10 hours of scanning or up to 5 hours in video mode and charges via Type-C 5 V / 3 A. The image can be sent to an external monitor via the RCA output.
Key Advantages
- Three bands: 1.2 / 3.3 / 5.8 GHz
- Frequency, RSSI and video on a 7″ screen
- Ignore function for known frequencies
- Up to 10 hours of scanning
- RCA output to an external monitor
Technical Specifications
| Parameter | Value |
|---|---|
| Device type | Portable video signal detector and receiver |
| Band 1 | 850–2200 MHz (1.2 GHz) |
| Band 2 | 2800–4150 MHz (3.3 GHz) |
| Band 3 | 4850–6100 MHz (5.8 GHz) |
| Scan step | 2 MHz |
| Scan cycle | 15–20 s, automatic across all bands |
| Interception range | up to 10 km (depends on conditions) |
| Indication | Frequency, RSSI, on-screen video, audible alert |
| Screen | 7″ |
| Video output | RCA for an external monitor |
| Battery | Built-in 10,000 mAh |
| Operating time | up to 10 h (scan) / up to 5 h (video) |
| Power / charging | Type-C 5 V / 3 A |
Applications
Rapid detection of FPV drone video channels by tactical units, EW crews, facility security and mobile observation teams.