The EDUP EP-SK0076 gigabit PoE splitter separates data and power from one cable and delivers 12 V / 2 A (24 W).
The splitter takes power over twisted pair per IEEE 802.3af/at (44–57 V) and converts it into a stable 12 V DC on a DC 5.5×2.1 mm connector. Data goes to a separate gigabit RJ45 at up to 1000 Mbps, so equipment without built-in PoE support is powered over a single cable.
The output current is up to 2 A (24 W). It has protection against short circuit, overvoltage and overcurrent; no settings or software are needed. The operating temperature range is −20 to +60 °C.
Key Advantages
- Power and data over one cable
- 12 V / 2 A (24 W) output
- Gigabit RJ45 port
- Short circuit, overvoltage and overcurrent protection
- Operation from −20 to +60 °C
Technical Specifications
| Parameter | Value |
|---|---|
| Model | EDUP EP-SK0076 |
| Interfaces | Input: 1 × RJ45 (PoE); output: 1 × RJ45 (data), 1 × DC 5.5×2.1 mm (power) |
| Data rate | 10/100/1000 Mbps |
| PoE standards | IEEE 802.3af / 802.3at |
| Input voltage | 44–57 V DC |
| Output voltage | 12 V DC |
| Output current | up to 2 A |
| Maximum power | 24 W |
| Protection | Short circuit, overvoltage, overcurrent |
| Operating temperature | −20 °C to +60 °C |
Applications
Powering IP cameras, access points and other 12 V equipment over PoE.