A dual Intelligent Flight Battery of 10,000 mAh for DJI Mavic 3 Series drones — a modified assembly of two batteries for extended flight.
The design combines two cells into one LiPo 4S assembly with a voltage of 15.4 V, a capacity of 10,000 mAh and 154 Wh of energy. This increases endurance over standard batteries and reduces the need for frequent landings to swap them. The integrated control board works with the flight controller's stock protocols, so charge level and estimated flight time are shown in the control interface.
The assembly has non-standard dimensions and extra weight, so the drone's balance and center of mass change and the load on the propellers during takeoff and hover increases slightly. Installation requires an adapted mount or a special bay cover. The monitoring system distributes load across the cells during discharge and prevents voltage imbalance between cells even under heavy motor use in windy weather.
Key Advantages
- 10,000 mAh, 154 Wh
- Charge and flight time shown in the interface
- Load distribution across cells during discharge
- Extended flight endurance
Technical Specifications
| Parameter | Value |
|---|---|
| Nominal capacity | 10,000 mAh |
| Voltage | 15.4 V |
| Cell type | LiPo 4S (assembly of two batteries) |
| Energy | 154 Wh |
| Telemetry | Charge and remaining time shown in the control interface |
| Installation | Requires an adapted mount or a special bay cover |
| Compatibility | DJI Mavic 3, Mavic 3 Pro, Mavic 3 Classic, Mavic 3 Enterprise |
Applications
Extending flights of DJI Mavic 3 Series drones on long missions, reconnaissance or inspections.