|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
📝 Control Transmitter Aeronetix LR1121 TX 200–650 MHz 5W
The Aeronetix LR1121 TX 200–650 MHz 5W control transmitter is designed for long-range FPV drone and UAV control systems. The transmitter is built on the LR1121 modulator with an NPA1003 power amplifier that boosts the output signal up to 5W. It operates in a wide frequency range of 200–650 MHz, allowing use in various control systems and repeaters. Compatible with MilELRS and ExpressLRS firmware.
🫡 We are a team of veterans
From long-range control system experience, LR1121 transmitters provide very stable links at long distances, especially in frequencies below 700 MHz. The 5W output allows operation through repeaters or over very long distances with a proper antenna system. These transmitters are often used in ground stations or repeater systems. When configured correctly, the control link stability is very high.
⚙️ Specifications
| Parameter | Value |
|---|---|
| Product type | Control transmitter |
| Module | LR1121 |
| Amplifier | NPA1003 |
| Operating frequency | 200–650 MHz |
| Output power | Up to 5W |
| Firmware support | MilELRS, ExpressLRS |
| Application | UAV / FPV control |
| Usage | Ground stations, repeaters |
| System type | ELRS |
💬 Comment / comments
The transmitter is built on the LR1121 chip which supports low-frequency long-range communication. The NPA1003 amplifier allows output power up to 5W, significantly increasing control range. The transmitter can be used in ground stations or repeater systems. Works with MilELRS and ExpressLRS firmware.
🎯 Who it is suitable for
Military units and UAV operators. Used for building long-range drone control systems in the 200–650 MHz band. Suitable for ground stations, repeaters and long-range control systems. The 5W power allows operation at long distances with proper antennas.
FPV drone operators. Suitable for long-range FPV systems where a stable control link is required. Can be used with ELRS or MilELRS systems. Provides significantly longer range compared to standard transmitters.
UAV engineers and drone builders. Used for building communication systems, repeaters and ground stations. Suitable for complex long-range control systems. Can be integrated into custom UAV control systems.
Radio amateurs and RF specialists. Can be used in experimental radio systems and long-range communication setups. Supports multiple frequency bands within 200–650 MHz. Suitable for building custom control or telemetry systems.
Supported firmware:
MilELRS: Aeronetix_ESP32_LR1121_5W_150_450_TX, Aeronetix_ESP32_LR1121_5W_450_750_TX
ELRS: https://github.com/mishadesh/ExpressLRS/tree/aeronetix_lr1121
Documentation:
https://drive.google.com/drive/folders/1TlDj48HN1CEKxnUiLv6ILESy7iNJ0ACf