|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
An industrial-grade RTK multirotor platform built for reconnaissance, inspection, and search-and-rescue missions under demanding field conditions. It combines extended flight endurance, OcuSync Enterprise transmission, and enhanced interference resistance.
The Matrice 300 RTK is built on a reinforced airframe with folding arms, speeding up field deployment and transport. Its six-directional obstacle sensing system (visual + infrared) enables obstacle avoidance along every axis, while the built-in RTK module significantly reduces positioning error even near metal structures. Power comes from two hot-swappable TB60 batteries that can be replaced without powering down the aircraft, allowing missions to continue without a full system restart. The platform supports dual-operator mode, splitting flight control and payload control between two remote controllers.
Key Advantages
- Up to 55 minutes of flight time per battery set
- Transmission range up to 15 km (OcuSync Enterprise, automatic 2.4/5.8 GHz switching)
- Six-directional obstacle sensing (visual + infrared)
- Hot-swappable batteries without powering down the aircraft
- Supports up to three simultaneous payloads
- IP45-rated housing
- Operating temperature range from −20 °C to 50 °C
- Dual-operator mode support
- Before dispatch, we conduct a full cycle of drone inspection and coordinate the preparation option tailored to your tasks. If anonymization is required, we select the available solution for the specific model: software (1001 firmware) or hardware ("canadian" modification). The former is faster and does not require disassembling the drone, the latter works where the firmware cannot be installed and completely disables the GPS on a physical level.
Technical Specifications
| Parameter | Value |
|---|---|
| Max flight time | 55 min |
| Max speed (S-mode) | 23 m/s |
| Max speed (P-mode) | 17 m/s |
| Max transmission distance | up to 15 km |
| Max takeoff weight | 9 kg |
| Max payload | 2.7 kg |
| Weight (single downward gimbal, no batteries) | approx. 3.6 kg |
| Weight (with two TB60 batteries) | approx. 6.3 kg |
| Dimensions (unfolded, propellers excluded) | 810 × 670 × 430 mm |
| Diagonal wheelbase | 895 mm |
| Max wind resistance | 15 m/s |
| Service ceiling above sea level | 5000 m (2110 propellers) / 7000 m (2195 propellers) |
| Ingress protection rating | IP45 |
| Operating temperature | −20 °C to 50 °C |
| Satellite positioning | GPS + GLONASS + BeiDou + Galileo |
| Hovering accuracy (RTK, P-mode) | ±0.1 m (horizontal and vertical) |
| RTK positioning accuracy (fixed solution) | 1 cm + 1 ppm (horizontal) / 1.5 cm + 1 ppm (vertical) |
| Max pitch angle | 30° |
| Max angular velocity (pitch / yaw) | 300°/s / 100°/s |
| Supported DJI gimbals | Zenmuse XT2, XT S, Z30, H20, H20T |
| Gimbal configurations | single downward, dual downward, single upward, upward + downward, triple |
| Battery | TB60, 5935 mAh, 52.8 V, LiPo 12S, 274 Wh |
| TB60 battery weight | approx. 1.36 kg |
| Obstacle sensing range (vision system) | forward/backward/left/right 0.7–40 m, upward/downward 0.6–30 m |
| Obstacle sensing range (infrared system) | 0.1–8 m |
| FPV camera | 960p, 145° FOV, 30 fps |
Package Contents
- Aircraft body — 1 pc.
- DJI Smart Controller Enterprise — 1 pc.
- TB60 Intelligent Flight Battery — 2 pcs.
- WB37 Intelligent Battery (for controller) — 1 pc.
- 2110 propellers (CW/CCW) — 1 pair each
- Landing gear — 2 pcs.
- USB charger, USB-C cable
- Spare parts set (propeller mounts, stick covers, gimbal dampeners)
Application Area
The platform is intended for aerial reconnaissance, infrastructure inspection, mapping, and search-and-rescue operations in field conditions, particularly where long-range signal stability and precise positioning near metal structures are critical. All quadcopters come with a 12-month warranty.