Kreminets 513 is a portable three-channel FPV drone detector that intercepts analog video in the 1.2, 3.3 and 5.8 GHz bands and shows the drone's camera feed.
The detector scans the 910–1840, 2300–3990 and 4900–6184 MHz ranges automatically — by channel table and continuously across the range; scan progress is shown on a small display. When it finds a signal with video, it gives a visual and audible alert, stops on the detected frequency and switches to video mode on command. Built-in filtering rejects signals without video, which reduces false alarms on a crowded spectrum. Channels and frequencies can also be switched manually.
The built-in 6000 mAh battery provides up to 3 hours of operation; it can be charged via USB Type-C or from a 2S–6S FPV battery via XT60, which is convenient in the field. The housing is made of PETG plastic, and firmware updates over Wi-Fi.
Key Advantages
- Three bands: 1.2 / 3.3 / 5.8 GHz
- Automatic stop on a signal with video
- Filtering of false signals without video
- Charging via USB Type-C or a 2S–6S FPV battery
- Firmware updates via Wi-Fi
Technical Specifications
| Parameter | Value |
|---|---|
| Device type | Video-signal FPV drone detector |
| Number of bands | 3 |
| Scan ranges | 910–1840 / 2300–3990 / 4900–6184 MHz |
| Signal type | Analog video (1.2 / 3.3 / 5.8 GHz) |
| Scanning | Automatic by channel table and continuous range |
| Alerts | Audible and visual |
| On detection | Automatic stop on a signal with video |
| Manual control | Channel and frequency switching |
| False signal filtering | Yes (signals without video) |
| Battery | Built-in 6000 mAh |
| Operating time | up to 3 hours |
| Charging | USB Type-C or XT60 (2S–6S) |
| Firmware updates | Via Wi-Fi |
| Housing | PETG plastic |
Applications
Early detection of FPV drones on duty at positions, monitoring the air situation, and covering equipment and personnel — in mobile and stationary setups.