|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
📝 Remote Antenna Sky Rage Berkut + AvengeAngel Repeater + Two WL400 N-type – N-type Coaxial Cable Sets 20 m Each Tactical Signal Amplification System Sky Rage Berkut + AvengeAngel + 40 m WL400
Remote Antenna Sky Rage Berkut + AvengeAngel Repeater + WL400 40 m cable set is designed to build a remote antenna system for UAV control that allows operators to work from cover while maintaining a stable control link and video transmission over long distances. The system allows the transmitting antenna to be placed up to 40 meters away from the operator, significantly increasing safety and reducing the risk of radio direction finding.
The system is based on the Sky Rage Berkut active antenna, the AvengeAngel repeater, and a low-loss WL400 coaxial cable line. The repeater compensates signal loss in long coaxial cables and ensures full operation of the antenna amplifiers, providing extended communication range, stable video transmission, and improved resistance to electronic warfare interference.
🫡 We are a team of veterans
We work with communication and signal amplification systems directly in real UAV operational conditions and understand that the main purpose of such equipment is not just increasing flight range, but ensuring stable communication and operator safety. Remote antenna systems are used when the operator must work from cover or from a separated position.
We select equipment based on real operating conditions — electronic warfare environment, difficult terrain, urban areas, and long distances to the UAV. Such systems must operate as a single integrated system where the antenna, repeater, and cables are matched and provide maximum communication efficiency.
⚙️ Specifications
| Parameter | Value |
|---|---|
| System type | Remote active antenna with repeater |
| Antenna | Sky Rage Berkut |
| Repeater | AvengeAngel |
| Operating frequencies | 2400–2500 MHz / 5000–5875 MHz |
| Output power | up to 2 × 10 W |
| Amplification gain | 20–22 dB |
| Antenna gain | 2.4G — ~15 dBi / 5.8G — ~18 dBi |
| Noise figure | ≤ 2 dB |
| Cable | WL400 Low Loss |
| Cable length | 2 × 20 m (40 m) |
| Connectors | N-type – N-type |
| Antenna power | Battery |
| Battery capacity | ~6400 mAh |
| Power supply | 6–12 V |
| Antenna beam angle | ~65° H / ~20° V |
| Compatibility | DJI, Autel, industrial UAV |
| Purpose | Operation from cover, EW resistance |
💬 Comment / comments
The main problem with remote antennas is signal loss in long cables. If an antenna is connected through a 30–40 meter cable without a repeater, the signal becomes significantly weaker and the antenna amplifier cannot operate at full power. The AvengeAngel repeater in this system acts as an intermediate amplifier and prepares a stable signal before feeding it into the antenna.
WL400 cable is a low-loss coaxial cable designed for high-frequency communication systems. Using such a cable line allows the antenna to be installed on a mast, building roof, or separate position up to 40 meters away from the operator, significantly increasing UAV crew survivability and making radio direction finding more difficult.
🎯 Who is it for
Military UAV units, aerial reconnaissance teams, FPV operators, and reconnaissance drone operators are the primary users of this system. The system allows operation from dugouts, concrete shelters, basements, or separated positions where the antenna is installed on a mast or building roof while the operator remains at a safe distance.
Units operating in heavy electronic warfare environments will benefit from a more stable control and video link due to high output power, directional antenna characteristics, and low noise figure, allowing operation over long distances even in difficult radio environments.
Industrial and civilian UAV operators, energy sector inspection teams, rescue services, and engineering units can use the system for long-distance flights, infrastructure inspection, territory monitoring, and operations in difficult terrain or dense urban environments.