|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
The updated Avenger Booster 2.4G/5.2G/5.8G is a tri-band signal booster for DJI/Autel/FPV platforms, featuring a dual 10W (40 dBm)×2 power amplifier, IPX68 waterproof rating, and a built-in lithium battery. The design is optimized for field use: a portable form factor, stable link performance across three bands, and the ability to deploy the antenna at a distance from the operator to improve safety under signal direction-finding conditions or to enhance link quality in open areas.
Avenger supports Wi-Fi and OcuSync, operates within 2.4–2.5 GHz and 5.0–5.875 GHz (covering both 5.2G and 5.8G), and leverages DSSS/OFDM with TDD, enabling extended range while maintaining data throughput. Based on practical testing (without active EW), DJI Mavic 3 control range could exceed 20 km, after which the limiting factors were primarily the drone’s own hardware constraints rather than antenna power.
🎖️ We are a team of veterans
We select and test gear that must perform in real operational environments. Avenger 3-Band is built for scenarios where link stability, tri-band operation, and moisture protection are critical. In areas with active electronic warfare (EW), results will always depend on conditions, terrain, and the drone’s inherent hardware limitations.
📊 Technical Specifications
| Parameter | Value |
|---|---|
| Operating bands | 2.4G / 5.2G / 5.8G |
| Working frequencies | 2400–2500 MHz; 5000–5875 MHz |
| Protocols / compatibility | Wi-Fi, OcuSync |
| Standards | IEEE 802.11B/G/N/AC (2.4G), IEEE 802.11A/N/AC (5G) |
| Modulation methods | DSSS, OFDM |
| Duplex | TDD |
| Output power | 10W (40 dBm) ×2 |
| Transmission gain | 20–22 dB |
| Noise figure | ≤ 2.0 dB |
| Antenna gain | 2.4G: 15 dBi (±1) / 5.8G: 18 dBi (±1) |
| Beam angles | 65° (horizontal) / 20° (vertical) |
| Supported voltage | 6–12 V |
| Battery | 7.4 V, 6400 mAh |
| Continuous operation | up to 12 hours (claimed) |
| Protection rating | IPX68 |
| Connector type | N-K Female |
| Weight | 1680 g |
💬 Comments
Avenger 3-Band is intended for users who require true tri-band operation (2.4/5.2/5.8), high power headroom, and a sealed housing for wet environments. For best results, proper antenna placement, mounting height, clean line-of-sight, and minimizing obstacles between controller and aircraft are key.
🎯 Suitable for
Military and tactical units requiring a robust, stable control link.
DJI/Autel/FPV operators working in urban areas, tree lines, valleys, or complex terrain.
Pilots who need to deploy the antenna away from the operator position.
Missions requiring waterproofing and extended battery runtime.