A Mark4 V2 8" carbon frame with a 367 mm wheelbase, 5 mm arms and a weight of 164 g for 8-inch propellers.
The 3K carbon frame has 5 mm arms that are clamped between the bottom plates and damp low-frequency resonance, which simplifies PID tuning and gives a smoother picture from the FPV camera. The wheelbase is 367 mm, weight 164 g and maximum propeller size 8 inches.
The wide center section lets you fit two stacks (for example, a controller and a video transmitter separately); holes are 30.5×30.5 and 20×20 mm, camera 19×19 mm. All parts are fastened with standard M3 screws, and each arm mounts independently — only the damaged part needs replacing.
Key Advantages
- 3K carbon, 5 mm arms
- 367 mm wheelbase, propellers up to 8 inches
- Two stacks in a wide center section
- Independent arm mounting, M3 screws
- Weight 164 g
Technical Specifications
| Parameter | Value |
|---|---|
| Model | Mark4 V2 8" |
| Material | 3K carbon fiber |
| Wheelbase | 367 mm |
| Arm thickness | 5 mm |
| Top plate thickness | 2.5 mm |
| Bottom plate thickness | 2.5 mm |
| Flight controller holes | 30.5×30.5 mm / 20×20 mm |
| Video transmitter holes | 30.5×30.5 mm / 20×20 mm |
| Camera mount | 19×19 mm |
| Maximum propeller size | 8 inches |
| Weight | 164 g |
Applications
Building long-range 8-inch FPV quadcopters with increased payload.