Drone Motor for DJI Matrice 4, Gimbal PITCH Axis Motor is an original stepper-type servomotor designed for precise camera positioning along the pitch axis (vertical tilt). The module provides smooth compensation for the aircraft's dynamic fluctuations in flight, ensuring video stream stability and sharp image capture even during sharp maneuvering or operations in strong, gusty wind conditions.

This brushless electric motor integrates directly into the kinematic scheme of the quadcopter's three-axis stabilization platform, fully restoring the factory gimbal response parameters. Due to high winding density and sensitive digital position sensors, the Drone Motor for DJI Matrice 4, Gimbal PITCH Axis Motor responds to flight controller commands without delay, eliminating visual artifacts or motion blur during thermal or optical reconnaissance.

🫡 We Are a Team of Veterans

We know that the stability of gimbal operations on industrial platforms directly affects the accuracy of intelligence gathering and the safety of the aircraft itself. A failure or jamming of the motor along the pitch axis virtually blinds the crew, making adjustment or monitoring impossible. We consider the Drone Motor for DJI Matrice 4, Gimbal PITCH Axis Motor a critical component of the repair kit, allowing operators to quickly return the aircraft to service in field workshops, avoiding long downtime for expensive equipment.

⚙️ Technical Specifications

Parameter	Value
Compatibility	DJI Matrice 4
Stabilization Axis	PITCH (vertical tilt)
Motor Type	Brushless synchronous (BLDC)
Housing Material	Aviation aluminum alloy
Sensor Type	Built-in magnetic position encoder
Operating Voltage	Powered via stock gimbal board
Connection Interface	Flat Flex Cable (FFC)
Country of Manufacture	China (DJI)

Commentary / Comments

The key advantage of the Drone Motor for DJI Matrice 4, Gimbal PITCH Axis Motor lies in its integrated high-precision encoder, which continuously transmits tilt angle data to the gimbal control board with minimal error. The lightweight metal alloy housing effectively dissipates heat during prolonged continuous operation, preventing magnet overheating and loss of torque during long hovering or terrain scanning sessions.

The ribbon cable features a reinforced structure at bend points, minimizing the risk of tearing or contact failure caused by constant micro-vibrations. Installing the new assembly to replace one damaged by a hard landing or collision completely resolves image jitter issues and vertical horizon misalignment.

🎯 Target Audience / Suitable For

Military unmanned aerial system operators performing round-the-clock aerial reconnaissance and fire adjustment using heavy reconnaissance platforms receive a reliable repair assembly to restore camera functionality after mechanical damage. Precise operation of the tilt axis allows for confident tracking of moving targets, keeping them within the optics' field of view regardless of the UAV's pitch angle during maneuvers. Having a functional spare motor in the field repair kit minimizes aircraft downtime, ensuring the continuity of the unit's flight missions.

Engineers and service center technical specialists engaged in the maintenance, repair, and restoration of industrial-grade flight equipment can utilize this assembly for the complete replacement of worn out or burned stabilizer motors. Full compatibility with the platform's mounting spots and electronics guarantees successful camera calibration via standard software without requiring hardware modifications to the structure.

Rate this item

Drone Motor for DJI Matrice 4, Gimbal PITCH Axis Motor

In stock

SKU: 8147

Leave your feedback

$99

Quick order

Return conditions for goods of proper quality

Return conditions for goods at astreiatactical.com.ua

The item is not eligible for return:

If the item is free of defects, but more than 14 days have passed since the purchase.
If the item shows signs of use.
If defects appeared on the item due to the buyer's fault.
If the item is free of defects, but the factory packaging is opened or damaged.
If the receipt and warranty card are missing.

Exchange and return of goods is carried out via Nova Poshta:

Recipient: Sakhonenko Kseniia Serhiivna

Nova Poshta branch No. 9, Chernihiv, Krasnosilskoho St., 59, 14021

tel. +380993230988

Or at the address:

Oleny Telihy St., 1A, 04112, Kyiv, Ukraine

Which goods are subject to exchange or return:

goods for which there is a postal service receipt
goods in original packaging with preserved tags and labels that have not been used
goods purchased less than 14 days ago

Return conditions for goods of improper quality

Goods of improper quality have defects that make their use for the intended purpose impossible. The buyer has the right to return/exchange received goods of improper quality if they received:

- goods that have already been used and have a non-marketable appearance;

- goods with a defect;

- goods with an incomplete set;

- goods with damage (chips, scratches, stains, etc.).

Procedure for returning goods:

Call us and inform about your intention to return the paid item;
Provide the declaration number of the sent parcel and the bank card number for the refund;
After receiving the goods, within two business days we return your money or send another item

Conditions for shipping payment during return:

When returning goods and sending new goods to the buyer, shipping is paid by the buyer. In this case, the shipment of new goods is carried out only after receiving and inspecting the returned goods.
When refunding money, in case of non-payment for the return shipping by the buyer, the shipping amount is deducted from the refund.
If the item does not match the description due to the seller's fault, shipping both ways is paid by the seller.

Exchange and return of goods is carried out via Nova Poshta:

Refunds are made after receiving the goods.
Refunds are made to the card
Refunds are processed within 2 days from the moment the seller receives the parcel at the Nova Poshta branch.

	Quantity	Total

Total $0 Proceed to checkout