|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
A drone detector based on the TinySA Ultra spectrum analyzer for radio-electronic reconnaissance. It detects UAV control, video and navigation signals in the 800 MHz – 6 GHz range.
The device works passively: it does not emit signals and does not reveal the operator's position. Information about detected signals is shown on the display and duplicated by an audible alert (speaker or headphones), so you can react even without constant visual monitoring.
The detector is equipped with a log-periodic antenna and a 20 dB signal amplifier; the stated detection range is up to 1–1.5 km. The device registers the presence of a signal on the air, but does not determine the exact model or coordinates of the drone. Effectiveness depends on signal level, antenna type and terrain conditions.
Key Advantages
- Passive operation: no emission, does not reveal the position
- Frequency range of 800 MHz – 6 GHz
- On-screen indication and audible alert through a speaker or headphones
- Log-periodic antenna and 20 dB signal amplifier
- Built on the TinySA Ultra spectrum analyzer
Technical Specifications
| Parameter | Value |
|---|---|
| Product type | UAV detector (radio-electronic reconnaissance) |
| Base platform | TinySA Ultra |
| Frequency range | 800 MHz – 6 GHz |
| Detection type | Passive (no emission) |
| Detection range | up to 1–1.5 km |
| Antenna | Log-periodic |
| Signal amplifier | 20 dB |
| Indication | Display |
| Alert | Audible (speaker / headphones) |
| Purpose | Detection of UAVs and RF signals |
Applications
Detecting UAV activity in a unit's area of responsibility and monitoring the radio spectrum at positions where concealment matters. Monitoring the air before launch and during UAV operator work, spectrum analysis, frequency planning and diagnostics, and monitoring of the radio-frequency environment.