FPV RADAR is a receiving and analysis detector for early detection of FPV drone radio signals in the 1.2 / 2.4 / 3.3 / 4.9 / 5.8 GHz bands, with live video output from the drone's camera.
The device receives the video signal, determines frequency, channel and signal level, and shows them in real time on a separate technical display, while the intercepted FPV video appears on the main one. Video confirmation helps tell a real drone from interference and understand where it operates. Operating ranges are 1000–2250, 2300–3990 and 4900–6184 MHz; detection range is up to 3 km depending on conditions.
The detector works in auto scan, manual and Band Scanner modes, lets you lock a frequency and monitor the spectrum, and sounds an alert on detection. The built-in battery charges via USB Type-C, and charge is shown in percent and volts. Slots on the housing allow mounting on gear, in vehicles or at a fixed point.
Key Advantages
- Live video from the drone's camera for confirmation
- Frequency, channel and signal strength in real time
- Five bands: 1.2 / 2.4 / 3.3 / 4.9 / 5.8 GHz
- Auto scan, manual mode and Band Scanner
- Mounting on gear or structures
Technical Specifications
| Parameter | Value |
|---|---|
| Device type | FPV drone RF signal detector |
| Functions | Reception, analysis and video display of signals |
| Video display | Live FPV video |
| Technical display | Frequency, channel, signal strength (%) |
| Bands | 1.2 / 2.4 / 3.3 / 4.9 / 5.8 GHz |
| Operating ranges | 1000–2250 MHz; 2300–3990 MHz; 4900–6184 MHz |
| Detection range | up to 3 km (depends on conditions) |
| Displays | Video display + technical display |
| Modes | Auto scan, manual, Band Scanner |
| Audio alert | Yes |
| Power | Built-in battery, USB Type-C charging |
| Charge indication | Percent (%) and voltage (V) |
| Mounting | Slots for mounting on gear or structures |
Applications
Early detection of FPV drones at positions, on patrol, in vehicles and at fixed observation points; monitoring frequency activity in the area of responsibility.