"Wave-3" (Khvylia-3) is a portable tri-band FPV drone detector with three tuners that scan the 1.2, 3.3 and 5.8 GHz bands simultaneously and show intercepted video.
Three independent tuners work at the same time in the 1080–2200, 3060–3500 and 4900–5945 MHz bands, so a full scan cycle takes only about 6 seconds — reducing the risk of missing short bursts of activity. Detected video is shown on a 4.3″ display, while frequencies, RSSI level and the exclusion list appear on a secondary OLED screen. BlackList mode excludes own or known frequencies so you can focus only on unidentified signals.
To save power, the video screen turns off during scanning. The detector runs for up to 5 hours in scan mode and up to 6 hours in video mode and can be charged from USB-C, a 12/24 V vehicle supply or 4S / 6S batteries. It is operated with four buttons. The device only detects signals and is not designed to suppress them.
Key Advantages
- Three tuners at once, ~6 second cycle
- Video on a 4.3″ display + OLED with frequencies and RSSI
- BlackList mode for own frequencies
- Charging from USB-C, 12/24 V or 4S / 6S
- Up to 6 hours of operation
Technical Specifications
| Parameter | Value |
|---|---|
| Device type | Portable video signal detector |
| Band 1 | 1080–2200 MHz |
| Band 2 | 3060–3500 MHz |
| Band 3 | 4900–5945 MHz |
| Tuners | 3 (simultaneous operation) |
| Scan cycle | ~6 s |
| Video display | 4.3″ |
| Secondary display | OLED (frequencies, RSSI, BlackList) |
| BlackList mode | Yes (excluding own frequencies) |
| Power saving | Video screen off during scanning |
| Operating time | up to 5 h (scan) / up to 6 h (video) |
| Charging | USB-C, 12/24 V vehicle, 4S / 6S batteries |
| Controls | 4 buttons (scan, channels, RSSI, BlackList) |
Applications
Rapid detection of FPV drones by video channel in a unit's area of responsibility, at positions, in vehicles and on the move.